Zelenograd, Savelkinsky proezd, 4, 6th floor
Modular measuring instruments and ATE systems
Contact form


Item article:

The module is designed to generate a pulse command in the form of a closure of a pair of relay contacts (“dry” contact) connected to the contacts of the connector located on the front panel of the module. A pair of relay contacts and a corresponding pair of connector contacts form a command channel.

The module is a register-based device and has the dimensions C-2.

Each channel can work in two modes:

  • hardware control mode for the pulse command duration:
    • the relay is turned on by the power-on command from the PC, and the shutdown is triggered by a programmable timer;
  • program control mode for the pulse command duration:
    • relay switching is carried out by PC on / off commands.
Number of channels 10
Size C-2
Parameters of pulses generated in hardware control mode:
  • the duration of the pulse from 0.05 to 3.00 with;
  • discreteness of setting the pulse duration 0.05 s;
  • error in setting the pulse duration 0.01 s
Parameters of signals switched by the” dry “ contact of the module
  • voltage 40 V;
  • current 10 A;
  • power 300 VA
Galvanic isolation voltage at least 200 V
Type of switching element relay 8Э122
The time of short circuit/disconnection of contacts of the relay no more than 20 ms