MON8P mezzanine is designed to reproduce DC voltage across eight channels galvanically isolated from each other and from the housing.
The mezzanine provides verification of the main technical characteristics in the self-control mode.
|Reproduction of a direct current voltage on eight channels galvanically isolated from each other and control circuits||
The DC voltage is reproduced on each channel in the range from -10 to 10 V, in the subranges:
The limits of the permissible basic absolute error in reproducing DC voltage in the idle mode at an ambient temperature of (20 ± 2) ºС are equal to:
||Programmable step of reproducible DC voltage 0.1 mV|
|The “Reset” voltage values set at the outputs of the mezzanine DC voltage generating channels upon receipt of the “Reset Voltage” (CLR) program command in the mezzanine registers are in the range from -10 to 10 V|
The limits of the permissible additional absolute error in reproducing the DC voltage in idle mode are equal to:
||30 ms output voltage settling time|
|Maximum load current 10 mA|
|Maximum load capacity 0.01 uF|
|Load Connection Diagram - Two-wire||Mezzanine DC voltage reproduction circuits are galvanically isolated from the housing of the mezzanine carrier|
|Dielectric strength between the channels, as well as between the channels and the 200 V enclosure||Resistance of galvanic isolation between the channels, as well as between the channels and the housing 20 MOhm|